CNC Router engraving machine parameters: Model: CNC6090GZ Outside dimension:1150970650mm(LWH) Working platform size:1045720mm(LW) Frame Material:The whole machine used 6061 aluminum profiles Max. Feeding height:=140mm(From base of Z axis to platform) X, Y, Z Working Area:900(Y)600(X)140mm(Z) Sliding unit: X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws Drive unit: X axis:ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails Z axis: ø12 high-strength round rail Stepping motor:57 two-phase 3A (with handwheels) Driving Power for Stepping motor:AC220, 240W, out put:DC24V10A Maximum Idle speed:1500mm/min Working Speed :50-1500mm / min (different material with different speed settings). CNC Router engraving machine parameters. Model: CNC6090GZ Outside dimension: 1150970650mm(LWH) Working platform size: 1045720mm(LW) Frame MaterialThe whole machine used 6061 aluminum profiles Max. Feeding height: =140mm(From base of Z axis to platform) X, Y, Z Working Area: 900(Y)600(X)140mm(Z). X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws. X axis: ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails Z axis: ø12 high-strength round rail Stepping motor: 57 two-phase 3A (with handwheels) Driving Power for Stepping motor: AC220, 240W, out put: DC24V, 10A Maximum Idle speed: 1500mm/min Working Speed: 50-1500mm / min (different material with different speed settings) Spindle motor: 1500W high-speed variable frequency spindle motor, ER11 chuck, with 6mm collet. 1Water cooled spindle motor can work longer time than air cooled motor. 2Water cooled spindle motor has higher stability and better concentricity than air cooled motor. The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC220V). Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Drive of Stepping motor: 0-3.5A adjustable four-axis drive (TB6560AHQ chip, 24V power supply, 2,4,8,16 subdivision can be set, factory settings 8 subdivision) Repositioning precision: =0.05mm Cooling: Water-cooling Speed: 0-24000r/m Spindle precision: Radial runout = 0.03mm Carving command: G code / TAB file / nc file / NCC file VFD: AC220V, 1500W, 0-400Hz (built-in control box). USB Control box parameters. Protection: Emergency stop button Communication interface: through USB PORT connect with computer Software environment: Windows XP / win7 with 32 bit. (proper computer system makes the software run, otherwise it will not work). Woodworking industry: sculpture, round carving, wooden handicraft processing Advertising industry: advertising signs, logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products Other industries: The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry, such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter, making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet. The engraver will come with softwareFree Version. If you followed the installation tips offered by us, it works like full version. The software perform better on the Windows XP/Windows 7 and 32 bits system computer, it will not work on Win 8/10 and 64 bites system computer. Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software. (This is very important). Otherwise, the antivirus will regards the CNC software is virus and stop the installation. Please don’t update the software when installed, then it will not need the license Numbers. The NEW 1.5KW water-cooled VFD is available operating for long time, which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood. Water cooling spindle works more stable and durable. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a USB port output. Place the control box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Otherwise, it will damage the driver of the controller. Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Installing a CNC control software. Fllowing our manual or guideline to set uo the software. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our CNC machine now. Industrial Mach CNC engraving machine controller was designed for Mach system. Do not need to install any software and driver, Spring can be stretched to 3 meters. Waterproof design, very durable, anti-dirt, oil spray. Power by USB port. Dimensions: 22 x 8 x 3cm. Please note this item works with Mach 3 ONLY. The usb self-check light, you can type the ” scroll” on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F. Jog rate: J+, J. Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. France, Germany, spain, Italy. Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. 57 two-phase 3A (with handwheels). 1500W high-speed variable frequency spindle motor. ER11 chuck, with 6mm collet. CNC ROUTER ENGRAVING MACHINE. 4 Axis Router Machine. The whole machine used 6061 aluminum profiles. G code / TAB file / nc file / NCC file. Through USB PORT connect with computer. Windows XP / win7 with 32 bit. X, Y, Z Working Area. 900(Y)600(X)140mm(Z). =140mm(From base of Z axis to platform). This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Routers”. The seller is “weofferbestgoods” and is located in this country: GB. This item can be shipped to United Kingdom.
- Stepping motor: 57 two-phase 3A (with handwheels)
- Spindle motor: 1500W high-speed variable frequency spindle motor
- Spindle speed:: 24000 rpm
- Principal axis collet:: ER11 chuck, with 6mm collet.
- Model: CNC ROUTER ENGRAVING MACHINE
- Machine Type: 4 Axis Router Machine
- Cooling: Water-cooling
- Working platform size: 1045*720mm(L*W)
- Power Source: Electric
- Outside dimension: 1150*970*650mm(L*W*H)
- Frame Material: The whole machine used 6061 aluminum profiles
- Maximum Idle speed: 0-1500mm/min
- Working Speed: 50-1500mm / min
- Repositioning precision: ≤0.05mm
- Carving command: G code / TAB file / nc file / NCC file
- Recommend software: Installment Software, EMC2
- Communication interface: through USB PORT connect with computer
- Software environment: Windows XP / win7 with 32 bit
- X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z)
- Max. Feeding height: ≤140mm(From base of Z axis to platform)
- Brand: Unbranded/Generic
- Control: CNC